Configuring the Windows Recovery Source

Whether or not the public has run into a situation when it comes to plugging an external hard drive into a working computer and you can’t access files, Windows will no longer throw up an error message when you visit “You need to format your memory” . on disk before you can work with it. Do you want to format the file?” They obviously don’t want you to format it because that means you and your family will lose all data. The compression problem occurs every day in our favorite daily routine.

Disclaimer. Always make a last copy of your files by following one of the tips given here. If this is not clear, or if you have determined that information protection is not possible, seek qualified assistance before proceeding on your own!

This error can occur for many reasons. You usually avoid unwanted external hard drive operations OR prevent terrible things.

Connect the app to a friendUSB port, operating system, or computer and check if you can access it. Sometimes small errors happen that your computer can handle just fine. You can restart your computer and see if it’s natural. Or you can try the Antivirus Handle Tool to check and remove possible viruses on a persistent external drive.

  • Click Run on the Start button.
  • Type “cmd” in the “Clear” field and press Enter.
  • Type “chkdsk n:/f” in the command prompt window, then press Enter.
  • It will start repairing corrupted files and you will see many filenames before finally asking if you want to move the lost lines to another location. Just in case, click Yes.
  • If CHKDEK is able to start this process normally, you can certainly try to read the external hard disk again after restarting the computer. CHKDSK usually takes some time to the error, so be patient. When completed, the portable hard drive may return to normal as before.

    However, if you are unable to completethis operation and the following message appears: The file system type is RAW, CHKDSK may not be available for RAW discs. What exactly do you need to do?


    Next instructions on how to recover these documents from an unformatted external hard drive?

    If you still want to format your external hard drive after customers tried the above solutions, you can download MiniTool Power Data Recovery for free, which is a great concept to recover files on Windows.


    This tool is free and save read-only recovery software, which can help you recover deleted, formatted or lost data easily and quickly due to hard drive, SSD, USB flash drive, memory card account and other storage devices . It supports multiple “languages” including English, German, and Japanese. And it consists of different data recovery parts, namely this PC, removable disk, hard disk and CD/DVD drive. Before choosingrom games if you need to get started.

    Follow the following steps to recover data created from unformatted drives:

    Run MiniTool Electric Power Data Recovery and select the desired location on your hard drive where you really need to format, double click on it.

    Click Scan to start scanning for any missing data and files. They then have to wait for the scan methods to complete. The time request depends on the hard disk capacity of your hardware. Done if the program often shows you found files. In the meantime, if the scan is running, you can certainly check if the scan response matches what you need.

    Step 3. In this step, you need to mark the desired files, click “Save”, and then choose a natural location (usually another hard drive) to save any data that you may have chosen.

    To the endThrough the related process, you can format any external hard drive using Disk Management or MiniTool Partition Wizard. Both are great for formatting an external hard drive.

    However, if you are unable to complete this task and the following message appears: My file system type was RAW, CHKDSK is not available for RAW drives. In this case, you need to perform Disk Cleanup in order to recover data with MiniTool Power Data Recovery. In this case, this is often the only way to fix the error “You need to format the hard disk in the drive.”

    One of the sources for this solution is a purchased location to restore advanced Windows features, enable advanced Windows features, or restore a corrupted, healthy Windows image.

    You can choose Windows Update or A set of files as a source Becoming.

    Select A Recovery Source

    Windows Update is the default restore source, but you can configure Group Policy to specify one or more network locations of information containing entries needed to restore a Windows distribution or repair a corrupted Sprint system.


    Use Windows Update To Restore Advanced Features And Restore Windows Images

    1. Windows Update is enabled by default if allowed by your current computer’s policy settings.

    2. You can set Windows Update as a specific backup restore source. If you are using Windows Update as your primary and even backup recovery source, make sure your actual firewall is configured to allow access to Windows Update.

    Use Files As Working Source

    Instead of Windows Update, you can use the following as an image

    Your source:

  • Mounted can get any mounted Windows image from a WIM file to restore additional functionality and repair a corrupted operating system. Example: c:\mount\Windows. For more information about an image that captures a Windows image as a WIM file, see Capturing Disk Partition Images Using DISM.

  • Installing Windows

    You can use a running Windows installation as a reservoir to restore additional functionality when sharing the c:\Windows folder on a new network.

  • Folders side by side (SxS)

    You should be able to use the Windows Parallel Folder directly from a network share or from some removable media, such as the Windows installation media, as the source for the exact files. Example: z:\sources\SxS.

  • WIM file

    You use a Windows image file (.wim) to share the source over a network to restore additional functionality. You need to specify the index of the exact Windows image in the WIM document that you want to use, in addition to that you need to useprefix Wim: on the path to identify my format file. For example, to use index 3 in a file named contoso.wim, type: Wim:\\network\images\contoso.wim:3.

  • Using The “Group To” Method Sets The Preferred Restore Source

    Sometimes you can use the Group To policy to set your preferred restore source.

    Configure Group Policy To Get A Feature On Demand

    1. Open the group cover editor. For example, on a Windows 10 home PC, type “Edit Group Policy” on any startup screen, then select “Edit Group Policy” to open the Group Policy Editor.

    2. Click Computer Configuration, click Administrative Templates, click System, and then double-click Specify advanced feature installation options for Feature Repair option.

    3. Select the settings you want to reuse for on-demand features.

    Maintain Source Of Repair

    If you don’t useIf you use Windows Update as the source for feature restore and computer-assisted restore, consider the following variables to control the restore source.